Salient Features :

• Designed as per client need and requirement
• Proprietary design of Door hinge system with radial locking system
• Steam injector with steam trap / vacuum trap
• Jacket and Door heating coil for uniform heating
• 100 to 121 degree cycle
• HMI & PLC Automation
• Pressure switch , Boiler
• Water injector for cooling phase option

Salient Features :

• Designed as per client need and requirement
• Proprietary design of Door hinge system with radial locking system
• Entire cycle in Vacuum with post aeration system
• HMI and plc automation system.
• Air lock mechanism for safety
• Vacuum pump , pressure gauge , vacuum gauge , RTD sensors , Safety valves and pressure switch installed.
• Door lock sensor for operator safety.
• Jacketed chamber with door and bottom heating coils for uniform temperature inside chamber.
• Heating and Gas Expansion tanks are provided.

Salient Features :

• Available in CGMP Model / Standard model ( SS316 / SS304 )
• Boiler with saturated steam with ASME standards construction
• Special boiler construction with proprietary design for Good quality steam required to release the aroma of crop.
• Uniform steam supply inside reaction vessel with proprietary mechanism.
• Jacketed vessel with glass wool insulation.
• High pressure feed pump for boiler.
• SS 304 condenser with receiver and separator vessel.
• HMI and PLC automation with Crane system
• Oil / Perfume / Flavor Industry

Salient Features :

• Available in CGMP Model ( SS 316L).
• Heating & Cooling option available for direct and indirect heat transfer ( Jacketed vessel )
• Mixing of substances uniformly and homogeneously with special design mixer and chopper blades.
• Acid / Alkali mixing.
• Easy to clean.( SIP / CIP – Clean in process ).
• HMI & Fully Automation with PLCC panel

Salient Features :

• We offer GMP Model with SS 316 for contact and SS 304 for noncontact part.
• VFD available for different shaft speed control.
• Agitator shaft with baffle plate
• Pressure and vacuum tested vessel
• Heating / Cooling and insulated jackets complete with temperature control and safety equipment's.
• Eye bolt and Ring nut available

Salient Features :

• Available in CGMP Model / Standard model. (SS316 / SS304 )
• Heating & Cooling option available
• Heater available ( SS 316 Heater ) with sensor.
• Glass vessel with SS Lid and agitator
• Easy to clean.
• HMI & Fully Automation with PLCC panel.

Salient Features :

• Available in CGMP Model( SS316 / SS304 )
• Heating & Cooling option available for direct and indirect heat transfer ( Jacketed vessel )
• Mixing of substances uniformly and homogeneously with special design mixer and chopper blades.
• Angle seat valve , pressure safety valve , moisture addition , vacuum condition , dosing , metering , sampling , etc..
• HMI & Fully Automated.

Salient Features :

• Available in CGMP Model / Standard model. (SS316 / SS304 )
• Heating & Cooling option available
• Heater available ( SS 316 Heater ) with sensor.
• Jacketed & Glass wool insulation
• Easy to clean.
• HMI & Fully Automation with PLCC panel.

Salient Features :

• Available in SS 304 / MILD STEEL
• Shell & tube arrangement
• Inlet and outlet port threaded or flanged
• Thickness 2 mm to 16
• Pressure testing
• Hydrotesting

Salient Features :

• Available in CGMP Model
• Agitator blade with Special baffle plate arrangement.
• Lobe , Gear , Dosing , Inline homogenizer or Liquid transfer pumps
• CIP / SIP Process tanks
• Jacket heating and cooling arrangement for better heat transfer.
• HMI & Fully Automation with PLCC panel.

Salient Features :

• Available in CGMP Model
• Agitator blade with Special baffle plate arrangement.
• Lobe , Gear , Dosing , Inline homogenizer or Liquid transfer pumps
• CIP / SIP Process tanks
• Jacket heating and cooling arrangement for better heat transfer.
• Heating & Cooling option available
• HMI & Fully Automation with PLCC panel.

Salient Features :

• Available in CGMP Model / Standard model. (SS316 / SS304 )
• Hydrotesting & Air testing
• Jacketed & Glass wool insulation
• Bolted / Eyebolt

Salient Features :

• Available in CGMP Model ( SS316 / SS304 )
• MS construction available
• Conical tank
• Inlet and outlet port threaded or flange
• Thickness 2 mm to 16

Salient Features :

• Available in CGMP Model / Standard model. (SS316 / SS304 )
• Filtration system with three layers
• Inside SS mesh sheet
• Outer Filter cloth with different micron sizes
• Self cleaning cake mechanism
• Single port with vacuum system available
• Self cleaning cake mechanism

Salient Features :

• Available in CGMP Model / Standard model. (SS316 / SS304 )
• Filtration system with three layers
• Inside & Middle layer SS mesh sheet
• Outer Filter cloth with different micron sizes
• Self cleaning cake mechanism
• Single port with vacuum system available

Salient Features :

• Available in CGMP Model / Standard model ( SS316 / SS304 ) / MS
• Power separation or Dust particale separation .
• Vacuum pump
• Easy charging and discharging of powder & granules.
• HMI & Fully Automated.

Salient Features :

• Available in CGMP Model / Standard model. (SS316 / SS304 )
• Capacity : 25 to 1200 liters
• Heating & Cooling option available for direct and indirect heat transfer ( Jacketed vessel )
• Mixing of substances uniformly and homogeneously with special design mixer and chopper blades.
• Binder Addition System. (Optional)
• Inline co-mill for uniform granules. (Optional)
• Easy to clean.
• HMI & Fully Automation with PLCC panel.

Salient Features :

• Available in CGMP Model / Standard model ( SS316 / SS304 )
• HMI & Fully Automation with PLCC panel.
• Easy charging and discharging of powder & material.
• Dust free charging
• Low Noise and energy efficient system
• Homogenous mixing
• 60 liters to 2000 liters capacity

Salient Features :

• Uniform drying for heat sensitive material with material recovery system.
• HMI & Fully Automation with PLCC panel.
• Vacuum pump with receiver and separator.
• Ring nut or Central locking system available
• No of trays are customized according to client needs.
• Chamber is jacketed for uniform heat transfer with heating tank.
• Food grade silicone gasket
• 6 to 96 trays sizes available

Salient Features :

• Available in GMP Model / Standard model ( SS316 / SS304 )
• Ideal for Uniform Mixing of Dry and wet powders & granules
• Ribbon blades are available in different Baffle configuration.
• PTFE glands provided to prevent outside lubricants from contaminating inside material.

Salient Features :

• Available in GMP Model / Standard model (SS316 / SS304 )
• Ideal for Mixing powders & Homogenous lubrication of granules and powder.
• Safety Limit switches are installed for human safety.
• Easy charging and discharging of powder & granules.
• HMI & Fully Automated.

Salient Features :

• SS 304 / SS 316 tested material
• CGMP standard
• Manhole , lid , sampling port available
• Jacketed vessel / Non jacketed vessel
• Heater option available
• Cooling arrangement available with Glycol chiller.

Salient Features :

• Multiple speed drive of beaters can be adjusted through Variable Frequency Drive (VFD).
• Easy Dismantling & Cleaning.
• Effortless Portability with the help of Castor Wheels.
• Direction of blade rotation can be changed
• Multiple combination of Perforated Screen, Speeds, Number of blades.
• Magnetic stirrer also available

Salient Features :

These polypropylene, autoclavable carboys are equipped with a preassembled leak-proof stopcock. Ideal for storing and dispensing various laboratory solutions.

Medical Grade PP confirming to USP Class VI Autoclavable.

Salient Features :

These lightweight, autoclavable aspirator bottles are made from polypropylene and can be used for dispensing distilled water and other laboratory solutions. The leak-proof spigot screwed to the bottle requires only a half turn to open or close. Polyethylene cap and stopcock should be removed before autoclaving. Medical Grade PP confirming to USP Class VI.

Salient Features :

• Low Temperature Diaphragm upto -60°C for sub zero applications.
• EN 549 Tested & Approved compounds for Gas based applications.
• Dimensional Tolerance of +/- 0.001 inches achieved for Actuator Diaphragm.
• Tested for over 2 Million Cycles at 6 Bar Pressure for control valves.
• Skydrol Fluid resistant diaphragm compounds developed for Aero Space applications

Salient Features :

• Silicones Are Non-Chemically Reactive and Have Low Thermal Conductivity.
• It has exceptional resistance to extreme temperatures, both high and low, making it suitable for applications where temperature variations are prevalent. Silicone can withstand temperatures ranging from -60°C to 230°C (-76°F to 446°F).
• Silicone tubing is inert and resistant to many chemicals, including acids, alkalis, solvents, and other harsh substances, making it suitable for use in pharmaceutical, medical, and food processing industries.
• It is biocompatible and non-toxic, making it safe for use in medical and food-related applications where contact with the human body or consumable goods is necessary.
• Silicone exhibits excellent electrical insulation properties, making it useful in electrical and electronic applications where insulation is required.

Salient Features :

• Motor rpm control with VFD feature for precise speed
• Belt type & size customized as per client ( metal , fabric , etc.)

Salient Features :

• SS 304 / SS 316 Material
• FRAME & Door with No Vibration
• Lock and stoppers
• CGMP Standard
• SS table / Locker / Moving table
• SS CLADDING

Salient Features :

• Designed as per client need and requirement
• When door 1 is opened the display on the door 2 will indicate “WAIT” and at the door 1 the display will indicate “door open”
• When any of the door is kept open beyond a particular time say 2 min, a buzzer will be blown and the display at the doors will indicate “close door”
• When any door is opened the CF lamp is switched on, and the UV lamp will be switched off.
• Both doors are provided with electromagnetic locks

Salient Features :

• Double walled modular structure with 3” thick PUF insulation
• Standard Model(S) : Inside S.S. 304 & outside mild steel powder coated
• GMP Model(G) : Inside S.S. 304 & outside S.S. 304
• Temperature Range : 20°C to 60°C
• Temperature Accuracy : ± 0.2°C
• Temp Uniformity : ± 2°C
• Humidity Range : 40% to 95% RH
• Humidity Accuracy : ± 2% RH
• Humidity Uniformity : ± 3% RH
• Complete safety and alarm system

Salient Features :

• Designed as per client need and requirement
• Proprietary design of Quick release coupling for easy coupling.
• Standard FRL system with compressor
• 1 to 100 kg capacity available.
• Designed and installed as per Fire safety and Industrial safety norms.
• Electrically operated
• Pressure regulation system for control of air pressure.
• Low maintenance and easily serviceable.
• Humidity Uniformity : ± 3% RH
• Heavy duty construction

Salient Features :

• Proprietary design of Quick release / Remote release hook system.
• Standard crane system with electric hoist
• 1 to 10 ton capacity available.
• Electrically operated
• Web slings and Quick clamps for clamping
• Low maintenance and easily serviceable.
• Heavy duty construction.